;)
)
Quality is at the core of what we provide, our Quality Policy can be found here.
Through our experience, we can offer Full Turn Key Solutions in:
Electric Trace Heating > We can design, manufacture, install/train and control full Heat Tracing systems to compensate for heat losses on pipes, vessels, equipment etc. We can Raise or Maintain temperatures as appropriate.
Temperature Measurement > Industrial thermocouples and RTDs used to measure temperature up to 2300°C! They are used in a wide range of applications from pipelines to steel foundries and extremely hazardous areas like Nuclear Power Station reactors and boilers.
Fire-Survival Wiring > The only true fire survival cable on the market, which guarantees 3 hour plus escape time in the harshest of fires. We offer the full range of Heavy Duty and Light Duty cable in both Copper and Alloy 825.
“We have managed numerous Turn-Key solutions in Trace Heating. For instance we recently managed the Trace Heating Design, Manufacturing of Mineral Insulated Heating Units, Installation and Control of the Power China 50MW Molten Salt Tower CSP Project. Utilising our many years of experience in CSP and Trace Heating as well as our scope of operations with offices and factories on three continents, we were able to offer a cost effective solution that will last the lifetime of the project.“
“The Kuwait University project is one of the largest construction projects in the Middle East. It is however currently the largest mineral insulated cable project in the World due to the requirement of ultimate performance cabling for all the onsite underground refuge shelters. This project used over 250,000m of MICC copper fire survival cable along with 100,000’s of terminations sets. We provided training and onsite support to ensure a high quality and long life installation.“
“Since 2012, we have supplied over 1 million metres of bespoke designed Mineral Insulated Thermocouple Cable to the automotive industry. The cable supplied is a key component within Temperature Sensors used at various critical points within the powertrain of Heavy Goods Vehicles, Passenger Vehicles and Off Road Vehicles. MI Cable is essential in these applications to measure high temperatures accurately, therefore allowing the vehicle systems to operate at higher temperatures, and more efficiently to comply with EURO6 and other comparable standards worldwide.“
The Mineral Insulated Cable Company Ltd, now trading as Thermal Resources Management (TRM), has achieved an enviable range of some of the world’s toughest certifications across a wide range of industries.
A thermistor is an element that senses temperature and is made up of sintered semiconductor material which displays a big change in resistance in proportion to a small alteration in temperature. They normally have negative temperature coefficients meaning the resistance goes down as the temperature goes up. Thermistors are constructed using a combination of metals […]
Read More
A resistance thermometer or resistance temperature detector (RTD) is a device which measures temperature through the resistance of a conductor. Resistance of the conductor can vary with time. It is this property of the conductor that is used for industrial temperature measurement. The RTD’s primary purpose is to produce a resistance alteration in response to […]
Read More
A J type thermocouple is one of the most common and applicable thermocouple types. The most important thing to know about this thermocouple is that is has a small temperature range and a reduced lifespan if used at higher temperatures. It has positive leg which is made from an iron wire and negative leg consisting […]
Read More
Sensors that measure temperature can come in a wide variety with different features, but they all have one thing in common: they all measure temperature by checking for some change in a physical characteristic. In this article, we will be going through each type of industrial temperature sensor and how it works. How to measure […]
Read More
Self-regulating heat trace cables are often used to apply heat safely and efficiently for comfort, process, and maintenance purposes. They provide protection against burst water pipes, frozen roofs and gutters, ice and snow formation on ramps, paths, stairs, and many other applications. For residential and commercial buildings, these systems offer a reliable and long-term […]
Read More
Instrumentation and metrology are two terms that often get confused in some ways as they both relate to measuring. In this article, we’ll be clarifying the difference between instrumentation and metrology as well as defining each one and their role within industrial temperature measurement. What is instrumentation? Instrumentation is a fairly broad and general term […]
Read More
Maintaining or raising the temperature of pipes, instrument impulse lines, and vessels in cold conditions with specialised cables is called electrical trace heating or heat tracing. This type of heat trace is broadly used due to its impressive effects at protecting pipes and other important building elements from freezing. Care should be taken when heating […]
Read More
Industrial temperature measurement processes can have the characteristics of delaying and holding back changes in the values of the process variables. Time lags in process controls typically describes these process delays and the lags are caused by three properties of the process. These properties are resistance, capacitance, and transportation time. Resistance Resistance is the part […]
Read More
Rock wool insulation comes from a volcanic rock that is melted at a temperature of roughly 1,600C and then spun into wool. The newly created insulation is then bound together using resins and oils, giving the material waterproof qualities too. In this guide, we’ll be looking how rock wool insulation is used in relation to […]
Read More
)
)
)
)
)
)